MAX690EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 251kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 350μA |
| Power Dissipation | 400mW |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX690EPA+ Overview
There are 8 terminals on this power management that allow it to be mounted. Packaged in a Tube-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 5V. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Through Hole-axis. The power management belongs to the Power Management Circuits subcategory. 8 pins are present in total in this power management. 8 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.75V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 350μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX690. It requires 5V watts of power to operate this voltage supervisor. The maximum supply temperature voltage supervisor can handle is 10mA. As a general rule, this IC management operates at a frequency of 251kHz, which is fine for most applications.
MAX690EPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
350μA operating supply current
MAX690EPA+ Applications
There are a lot of Maxim Integrated MAX690EPA+ Voltage Supervisors applications.
- Refrigeration
- Personal computers
- Leakage current detection
- Electronics installed in the vehicle
- Digitally controlled LDO regulators circuit
- Microcontroller system
- Important electronics for automotive safety
- Solar power charger
- Efficient information transmission
- Fire equipment power monitoring system
