MAX690SCSA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Base Part Number | MAX690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX690SCSA Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. Packages are specified to have an average peak reflow temperature of 245. IC management is possible to find a succession of 1 voltages that have been checked. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. It is recommended that Vsup should not be less than 4.75V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 10mA. For similar manage ics search of the manufacturer, you can always refer to MAX690, the base PMIC number. It requires 3/5V watts of power to operate this voltage supervisor. The power management can work with a maximum supply temperature of 10mA.
MAX690SCSA Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX690SCSA Applications
There are a lot of Maxim Integrated MAX690SCSA Voltage Supervisors applications.
- Refrigeration
- Magnetic resonance imaging
- Utility meter
- Unattended substation automation
- Medical-specific isolation transformer
- Electronics installed in the vehicle
- Medical-specific insulation monitor
- Rechargeable batteries
- Fire equipment power monitoring system
- Satellite navigation
