banner_page

MAX690SESA+

8 Terminals 8-Pin MAX690 Voltage supervisor1 Channels Min 4.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX690SESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 964
  • Description: 8 Terminals 8-Pin MAX690 Voltage supervisor1 Channels Min 4.75V Max 5.5V (Kg)

Details

Tags

Parameters
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MAX690
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.75V
Operating Supply Current 10mA
Max Supply Current 10mA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 2.925V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8

MAX690SESA+ Overview


This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tube. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. 8 pins are on the supervisor. Supply voltage (Vsup) should be at least 4.75V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 10mA. A similar IC managements number of the manufacturer can always be found by using MAX690, the base power ics number. This power management requires 3/5V power to work. At most, voltage supervisor can operate at a supply temperature of 10mA.

MAX690SESA+ Features


Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current

MAX690SESA+ Applications


There are a lot of Maxim Integrated MAX690SESA+ Voltage Supervisors applications.

  • Battery-powered equipment
  • Kitchen appliances
  • Digitally controlled LDO regulators circuit
  • Military electronics
  • Telecommunications equipment
  • Smartphones
  • Important electronics for automotive protection
  • Utility meter
  • Power distribution systems of infant care room
  • Unattended substation automation

Write a review

Note: HTML is not translated!
    Bad           Good