MAX690TCPA+
| Parameters | |
|---|---|
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
MAX690TCPA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Through Hole. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 8 pins in it. This power management system has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.75V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Through Hole mounting type is recommended. You should set the supervisor's temperature during 0°C~70°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. Supplied with a operating current of 10mA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to MAX690, the base PMIC number. This power management requires 3/5V power to work. The maximum supply temperature that PMIC chip can work with is 10mA.
MAX690TCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX690TCPA+ Applications
There are a lot of Maxim Integrated MAX690TCPA+ Voltage Supervisors applications.
- Important electronics for automotive protection
- Important electronics for automotive safety
- DSP
- Consumer electronics
- Efficient information transmission
- Radio
- Multi-voltage system
- Functional modules
- Display equipment
- Leakage protection
