banner_page

MAX690TCSA+

8 Terminals 8-Pin MAX690 Voltage supervisor1 Channels Min 4.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX690TCSA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 770
  • Description: 8 Terminals 8-Pin MAX690 Voltage supervisor1 Channels Min 4.75V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number MAX690
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.75V
Operating Supply Current 10mA
Max Supply Current 10mA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 3.075V
Number of Voltages Monitored 1
Reset Timeout 35ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX690TCSA+ Overview


There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tube way. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 4.75V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 10mA. To find similar IC managements from the manufacturer, you can always search by MAX690. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10mA.

MAX690TCSA+ Features


Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current

MAX690TCSA+ Applications


There are a lot of Maxim Integrated MAX690TCSA+ Voltage Supervisors applications.

  • Fire equipment power monitoring system
  • DC stabilized power supply module
  • Leakage current detection
  • Insulation fault location system
  • Personal computers
  • Battery-powered equipment
  • Unattended substation automation
  • Electronics installed in the vehicle
  • Battery cars
  • Leakage protection

Write a review

Note: HTML is not translated!
    Bad           Good