MAX690TEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35 ms |
| Min Reset Threshold Voltage | 4.5V |
| Threshold Voltage | 3.075V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX690TEPA+ Overview
As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. Please refer to power management for PDIP functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 1-voltage supply. The mount is provided by Through Hole. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 8 pins on the board. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4.75V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). As far as the supply current of the power management is concerned, it is 10mA. It requires 3/5V watts of power to operate this voltage supervisor. A maximum supply temperature of 10mA can be used with this power management.
MAX690TEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX690TEPA+ Applications
There are a lot of Maxim Integrated MAX690TEPA+ Voltage Supervisors applications.
- DSP
- Fire equipment power monitoring system
- Magnetic resonance imaging
- Precision measurement
- Functional modules
- Leakage protection
- Embedded computing
- Power distribution systems of CCU
- Kitchen appliances
- Network equipment
