MAX691ACPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 2.54mm |
| Frequency | 250kHz |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Max Output Current | 25mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 842mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691ACPE+ Overview
A total of 16 terminals are used to mount this power management. It is packaged with Tube. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for 16-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. In a 4.75V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 16. This power management has 16 pins. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole is the recommended mounting type. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. There is a supply current of 350μA for the power management. It is always advisable to use MAX691, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 100μA. Because voltage supervisor will be effective in most cases, a frequency of 250kHz is generally acceptable.
MAX691ACPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX691ACPE+ Applications
There are a lot of Maxim Integrated MAX691ACPE+ Voltage Supervisors applications.
- Telecommunications equipment
- Battery cars
- Set top box
- Radio
- Kitchen appliances
- Sensitive sensors
- Military electronics
- emergency room
- Electric heating appliances
- Radar
