banner_page

MAX691ACWE+

4.75V16 Terminals 16-Pin MAX691 Voltage supervisor1 Channels 250kHz Min 0V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX691ACWE+
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 465
  • Description: 4.75V16 Terminals 16-Pin MAX691 Voltage supervisor1 Channels 250kHz Min 0V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 762mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.75V
Frequency 250kHz
Base Part Number MAX691
Output Push-Pull, Push-Pull
Pin Count 16
Max Output Current 25mA
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 0V
Operating Supply Current 350μA
Nominal Supply Current 30μA
Power Dissipation 762mW
Max Supply Current 100μA
Adjustable Threshold YES
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Height 2.35mm
Length 10.5mm
Width 7.6mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX691ACWE+ Overview


There are 16 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 16-SOIC (0.295, 7.50mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 4.75V-voltage supply. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. A total of 16 pins are located on this power management. 16 pins are present on the power management system. It is recommended that Vsup should not be less than 0V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. The power management's supply current is 350μA. You can always use MAX691, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 100μA. Most of the time, a frequency of 250kHz works well with this IC power.

MAX691ACWE+ Features


Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current

MAX691ACWE+ Applications


There are a lot of Maxim Integrated MAX691ACWE+ Voltage Supervisors applications.

  • Leakage protection
  • Microprocessor system
  • Power distribution systems of CCU
  • Smart meter
  • Set top box
  • Automotive permanent magnet synchronous motors
  • Computer applications
  • Telecommunications equipment
  • Functional modules
  • Power communication system

Write a review

Note: HTML is not translated!
    Bad           Good