MAX691ACWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EITHER VCC OR VBATT CAN GO TO 0V, IF THE OTHER IS GREATER THAN 2.0V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691ACWE+T Overview
Power management is mounted through 16 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 16-SOIC (0.295, 7.50mm Width) functions for you to refer to. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 4.75V supply voltages. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, it has 16 pins on IC management. 16 pins make up the power management. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. In order to maintain a stable supply current for the power management, 100μA is the recommended value. Supervisors are also additional features, such as [0] for example, which are worth mentioning. For similar manage ics search of the manufacturer, you can always refer to MAX691, the base PMIC number. There is a requirement for 5V power to power this power management. The power management can work with a maximum supply temperature of 100μA.
MAX691ACWE+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX691ACWE+T Applications
There are a lot of Maxim Integrated MAX691ACWE+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Household appliances
- Battery cars
- Multi-voltage system
- Utility meter
- Satellite navigation
- Important electronics for automotive safety
- Precision measurement
- Power distribution systems of infant care room
- Fire equipment power monitoring system
