MAX691AEPE+
| Parameters | |
|---|---|
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 100μA |
| Max Supply Current | 100μA |
MAX691AEPE+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 16-DIP (0.300, 7.62mm) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 4.75V. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Through Hole-axis. The power management system can be categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. Power managment ic pin count is 16. It is recommended that Vsup should not be less than 0V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Through Hole type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. The power management's supply current is 350μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX691, which is the base power ics number. In order to operate this power management, it requires 5V volts of power. At most, voltage supervisor can operate at a supply temperature of 100μA.
MAX691AEPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX691AEPE+ Applications
There are a lot of Maxim Integrated MAX691AEPE+ Voltage Supervisors applications.
- WiFi router
- Stable power system
- emergency room
- Leakage current detection
- Military electronics
- Battery cars
- Battery-powered equipment
- Cloud computing
- Precision measurement
- Set top box
