MAX691AESE+
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Frequency | 248kHz |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Max Output Current | 25mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 696mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
MAX691AESE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Packaged in a Tube-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 16-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 4.75V-voltage supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. There are 16 pins on the supervisor. IC management can only work with a supply voltage of 0V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. The supervisor's supply current is specified to 350μA. To find similar IC managements from the manufacturer, you can always search by MAX691. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 100μA can be used with this power management. The frequency at which this IC power works is usually 248kHz kHz, which is sufficient for most applications that require this IC power to function.
MAX691AESE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX691AESE+ Applications
There are a lot of Maxim Integrated MAX691AESE+ Voltage Supervisors applications.
- Set top box
- Smart meter
- Rechargeable batteries
- Display equipment
- Urban rail transit weak current power monitoring
- Leakage current detection
- Medical-specific insulation monitor
- Power distribution systems of operating room
- Radar
- Network equipment
