MAX691AESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EITHER VCC OR VBATT CAN GO TO 0V, IF THE OTHER IS GREATER THAN 2.0V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691AESE+T Overview
There are 16 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for 16-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 4.75V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 16 pins that are attached to IC management. Power managment ic pin count is 16. IC management can only work with a supply voltage of 0V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. The supply current of the power management is 100μA. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX691, which is the base power ics number. The power management must be powered by 5V volts to function properly. At most, voltage supervisor can operate at a supply temperature of 100μA.
MAX691AESE+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX691AESE+T Applications
There are a lot of Maxim Integrated MAX691AESE+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Embedded computing
- Military communications
- Transformer load monitoring equipment
- Utility meter
- Battery-powered equipment
- Microcontroller system
- Microprocessor system
- Detection of phase imbalance
- Analog circuit
