MAX691AEWE+
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 30μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
MAX691AEWE+ Overview
A total of 16 terminals are used to mount this power management. Packaging is in the form of a Tube. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 16-SOIC (0.295, 7.50mm Width) functions. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. The package peak reflow temperature is specified to be 260. When 4.75V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. A total of 16 pins are located on this power management. Pin count of the power management is 16. It is recommended that Vsup should not be less than 0V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. There is a supply current of 350μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MAX691, the base PMIC number. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature that PMIC chip can work with is 100μA.
MAX691AEWE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX691AEWE+ Applications
There are a lot of Maxim Integrated MAX691AEWE+ Voltage Supervisors applications.
- Electrical fire monitoring system
- emergency room
- Electronics installed in the vehicle
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
- Display equipment
- Low voltage/high power - AI, GPU
- Leakage current detection
- Linux and server computing
- WiFi router
