MAX691AEWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EITHER VCC OR VBATT CAN GO TO 0V, IF THE OTHER IS GREATER THAN 2.0V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691AEWE+T Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of 16-SOIC (0.295, 7.50mm Width) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 4.75V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. It has a total of 16 pins that are attached to IC management. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 100μA is the recommended value. Additionally, IC management are a variety of features, for example [0], to name a few. To find similar IC managements from the manufacturer, you can always search by MAX691. To be able to work, this power management requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 100μA.
MAX691AEWE+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX691AEWE+T Applications
There are a lot of Maxim Integrated MAX691AEWE+T Voltage Supervisors applications.
- Magnetic resonance imaging
- Refrigeration
- Power distribution systems of ICU
- Precision measurement
- Dash board
- Kitchen appliances
- Battery-powered equipment
- Microcontroller system
- Microprocessor system
- External alarm
