banner_page

MAX691CWE

16-Pin MAX691 Voltage supervisor247kHz Min 4.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX691CWE
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 523
  • Description: 16-Pin MAX691 Voltage supervisor247kHz Min 4.75V Max 5.5V (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
ECCN Code EAR99
Type Battery Backup Circuit
Max Power Dissipation 600mW
Frequency 247kHz
Base Part Number MAX691
Output Push-Pull, Push-Pull
Pin Count 16
Max Supply Voltage 5.5V
Min Supply Voltage 4.75V
Operating Supply Current 350μA
Nominal Supply Current 3.5mA
Power Dissipation 600mW
Max Supply Current 10mA
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored 1
Reset Timeout 35ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Height 2.35mm
Length 10.5mm
Width 7.6mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MAX691CWE Overview


Packaged in a Tube-shape, IC management comes with a number of features. For your reference, this PMIC includes a list of 16-SOIC (0.295, 7.50mm Width) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. In total, the power management has 16 pins in it. Pin count of the power management is 16. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.75V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. Supplied with a operating current of 350μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX691, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 10mA. The frequency at which this IC power works is usually 247kHz kHz, which is sufficient for most applications that require this IC power to function.

MAX691CWE Features


Battery Backup Circuit type
Minimum supply voltage of 4.75V
350μA operating supply current

MAX691CWE Applications


There are a lot of Maxim Integrated MAX691CWE Voltage Supervisors applications.

  • Detection of phase sequence
  • Set top box
  • External alarm
  • Insulation fault location system
  • Low voltage/high power - AI, GPU
  • Detection of phase loss
  • Electrical fire monitoring system
  • Military electronics
  • Solar power charger
  • WiFi router

Write a review

Note: HTML is not translated!
    Bad           Good