MAX691EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 250kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Power Dissipation | 600mW |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 3.302mm |
| Length | 19.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691EPE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. There is a Tube-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. When 1 is applied to the power ic, it conducts. Through Hole mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, it has 16 pins on IC management. The pins of the power management system count 16. A voltage (Vsup) that doesn't fall below 4.75V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. Supplied with a operating current of 10mA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to MAX691, the base PMIC number. A power supply of 5V watts is required for the operation of this power management. A maximum supply temperature of 10mA can be used. As a rule of thumb, voltage supervisor will work well in most cases with a frequency of 250kHz.
MAX691EPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX691EPE+ Applications
There are a lot of Maxim Integrated MAX691EPE+ Voltage Supervisors applications.
- Refrigeration
- DSP
- Embedded computing
- Urban rail transit weak current power monitoring
- DC stabilized power supply module
- Military communications
- Magnetic resonance imaging
- Medical-specific insulation monitor
- Solar power charger
- Kitchen appliances
