MAX692ACSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX692 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 200μA |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX692ACSA+ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. The pins of the power management system count 8. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: 0°C~70°C TA. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 350μA. A similar IC managements number of the manufacturer can always be found by using MAX692, the base power ics number. In order to operate this power management, it requires 5V volts of power. A maximum supply temperature of 350μA can be used.
MAX692ACSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
350μA operating supply current
MAX692ACSA+ Applications
There are a lot of Maxim Integrated MAX692ACSA+ Voltage Supervisors applications.
- Military electronics
- Analog circuit
- Microcontroller system
- FPGA design
- Detection of phase imbalance
- Radar
- Low voltage/high power - AI, GPU
- Important electronics for automotive safety
- Solar power charger
- Battery cars
