MAX692AEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX692 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 500μA |
| Max Supply Current | 500μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX692AEPA+ Overview
It is mounted through 8 terminals on the power management. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. Manage ics operate at 5V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 8 pins are located on this power management. 8 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 500μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX692, which is the base power ics number. This power management requires 5V power to work. The maximum supply temperature voltage supervisor can handle is 500μA.
MAX692AEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
500μA operating supply current
MAX692AEPA+ Applications
There are a lot of Maxim Integrated MAX692AEPA+ Voltage Supervisors applications.
- Power distribution systems of operating room
- Stable power system
- Leakage current detection
- Battery cars
- Magnetic resonance imaging
- Telecommunications equipment
- Multi-voltage system
- Microcontroller system
- Medical-specific isolation transformer
- Leakage protection
