MAX692CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 250kHz |
| Base Part Number | MAX692 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 400mW |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX692CPA+ Overview
As you can see, this power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. This IC power shares lots of benefits with other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount, Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 8. Power managment ic pin count is 8. IC management can only work with a supply voltage of 4.5V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Through Hole. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 350μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX692, which is the base power ics number. A power supply of 5V watts is required for the operation of this power management. At most, voltage supervisor can operate at a supply temperature of 10mA. Most of the time, a frequency of 250kHz works well with this IC power.
MAX692CPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
350μA operating supply current
MAX692CPA+ Applications
There are a lot of Maxim Integrated MAX692CPA+ Voltage Supervisors applications.
- Efficient information transmission
- Smart meter
- Power distribution systems of infant care room
- Electrical fire monitoring system
- Medical-specific insulation monitor
- Solar power charger
- Precision measurement
- Network equipment
- Leakage current detection
- Kitchen appliances
