MAX693ACPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX693 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 30μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX693ACPE+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 4.5V. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Through Hole-axis. This power ic can be sub-categorized as Power Management Circuits. There are a total of 16 pins on power management. There are 16 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Through Hole is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. The supervisor's supply current is specified to 350μA. For similar manage ics search of the manufacturer, you can always refer to MAX693, the base PMIC number. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature that PMIC chip can work with is 100μA.
MAX693ACPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX693ACPE+ Applications
There are a lot of Maxim Integrated MAX693ACPE+ Voltage Supervisors applications.
- Data storage applications
- Important electronics for automotive safety
- Urban rail transit weak current power monitoring
- DSP
- emergency room
- Smart meter
- FPGA design
- Satellite navigation
- Refrigeration
- Battery cars
