MAX693ACSE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX693 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX693ACSE+T Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 16-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 4.5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 16 pins in it. There are 16 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. Supplied with a operating current of 100μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by MAX693. The power management must be powered by 5V volts to function properly. The maximum supply temperature voltage supervisor can handle is 100μA.
MAX693ACSE+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX693ACSE+T Applications
There are a lot of Maxim Integrated MAX693ACSE+T Voltage Supervisors applications.
- Telecommunications equipment
- WiFi router
- DSP
- Analog circuit
- Consumer electronics
- Sensitive sensors
- Military communications
- Solar power charger
- Military electronics
- Electric heating appliances
