MAX6951CEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | COMMON-CATHODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX6951 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Configuration | 7 Segment |
| Interface | 3-Wire Serial |
| Operating Supply Current | 10mA |
| Power Dissipation | 667mW |
| Max Supply Current | 15mA |
| Display Type | LED |
| High Level Output Current | -50mA |
| Low Level Output Current | 400mA |
| fmax-Min | 8 MHz |
| Number of Segments | 64 |
| Multiplexed Display Capability | YES |
| Digits or Characters | 8 Digits |
| Height Seated (Max) | 1.73mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6951CEE+T Overview
Display drivers is designed similarly to Tape & Reel (TR).A version 16-SSOP (0.154, 3.90mm Width) Exposed Pad of the package includes it.As far as the display type of this electrical device is concerned, it is LED.An electronic component is mounted on a board using Surface Mount.This electrical part operates at 0°C~70°C degrees Celsius.I believe that it will work with a 2.7V~5.5VV power source.Transmission lines are terminated with 16 terminations using devices whose characteristic impedance matches that of the transmission line.The device belongs to the MAX6951 family.A 16 pin makes up the entire device.A 16 pin is used in its design.A Surface Mount axis is used to mount this electronic component on the board in order to get the best fit.There is a voltage of 3V applied to the supply voltage of this device.If 10mA is to function properly, it must be supplied with current.64 segments are the electronic solutions segment of the Seller Group's equipment solutions business.The same can also be done with Display Drivers.A high level of efficiency can be achieved by maintaining the supply voltage at 5.5V.Two 3/5V power supplies enable it to be used anywhere in the world.The maximum current supplied to it for operation reaches 15mA.Furthermore, it is characteriCOMMON-CATHODEed by COMMON-CATHODE as well.
MAX6951CEE+T Features
16-SSOP (0.154, 3.90mm Width) Exposed Pad package
MAX6951 family
16 pin count
16 pins
3/5V power supplies
MAX6951CEE+T Applications
There are a lot of Maxim Integrated MAX6951CEE+T display drivers applications.
- Smart Display
- Appliance control panels
- Small Appliances
- Auto dashboard displays
- Mobile smart TV
- Numerlc and Non-Numerlc Panel Dlsplays
- Bar Graphs and Matrix Displays
- Healthcare Products
- Test Equipment
- Car Audios / Radios
