banner_page

MAX6954APL+

Active DUAL 3.3V V Display Drivers ICs Tube Matte Tin (Sn) 128


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6954APL+
  • Package: 40-DIP (0.600, 15.24mm)
  • Datasheet: PDF
  • Stock: 899
  • Description: Active DUAL 3.3V V Display Drivers ICs Tube Matte Tin (Sn) 128 (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 40-DIP (0.600, 15.24mm)
Number of Pins 40
Operating Temperature -40°C~125°C
Packaging Tube
Published 2013
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 40
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Additional Feature BARGRAPH
HTS Code 8542.39.00.01
Subcategory Display Drivers
Max Power Dissipation 1.333W
Technology CMOS
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 2.54mm
Base Part Number MAX6954
Pin Count 40
Operating Supply Voltage 5.5V
Power Supplies 3/5V
Configuration 7, 14, 16 Segment, Common Cathode
Interface 4-Wire Serial
Operating Supply Current 22mA
Element Configuration Common Cathode
Display Type LED
High Level Output Current 55mA
Low Level Output Current 935mA
fmax-Min 8 MHz
Number of Segments 128
Multiplexed Display Capability YES
Digits or Characters 8 Digits, 16 Digits
Height Seated (Max) 5.08mm
Length 52.075mm
Width 15.24mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX6954APL+ Overview


Similar to Tube, the package has been designed in a similar manner.Version 40-DIP (0.600, 15.24mm) includes it.Display drivers has a Display type of LED.This electronic component is mounted on the board using Through Hole.Its operating temperature is -40°C~125°C.If you use a 2.7V~5.5VV power source, it should work.Using 40 terminations, transmission lines are terminated with devices that will match the characteristic impedance of the lines.Devices in the MAX6954 family include this one.Devices are made up entirely of 40 pins.With 40 pins, it is designed.As this electronic component is mounted on the board using the Through Hole axis, we can adjust the position of the component.The supply voltage of this device is 3.3V.Display drivers is necessary to provide the 22mA wDisplay driversh a supply current in order for Display drivers to perform fully as intended.128 segments refer to any member of the Seller Group's equipment solutions business that falls under the category of "Electronics.".Additionally, it can be incorporated into Display Drivers.In order to achieve a high efficiency level, it is essential that the supply voltage is kept at 5.5V.Display drivers operates from 3/5V power supplies.Drivers is also characteriBARGRAPHed by BARGRAPH.

MAX6954APL+ Features


40-DIP (0.600, 15.24mm) package
MAX6954 family
40 pin count
40 pins
3/5V power supplies

MAX6954APL+ Applications


There are a lot of Maxim Integrated MAX6954APL+ display drivers applications.

  • Bargraph Dlsplays
  • LED Matrix Displays
  • Smart Display
  • Appliance control panels
  • DC Plasma Displays
  • Relay Driver
  • Bar Graphs and Matrix Displays
  • Gaming Machines Security
  • Driving low-voltag fluorescent displays
  • Metering

Write a review

Note: HTML is not translated!
    Bad           Good