MAX6955AAX+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 941mW |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX6955 |
| Pin Count | 36 |
| Number of Outputs | 19 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Configuration | 7, 14, 16 Segment |
| Interface | I2C |
| Operating Supply Current | 22mA |
| Power Dissipation | 941mW |
| Output Current | 935mA |
| Max Supply Current | 30mA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Display Type | LED |
| High Level Output Current | 55mA |
| Low Level Output Current | 935mA |
| Number of Segments | 128 |
| Switching Frequency | 8MHz |
| Multiplexed Display Capability | YES |
| Number of Digits/Characters | 16-DIGIT |
| Height | 2.36mm |
| Length | 15.55mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6955AAX+ Overview
Display drivers is designed similarly to Tube.A version 36-BSOP (0.295, 7.50mm Width) of the package includes it.The type of display used in this electrical device is LED.The board mounts this electronic component using Surface Mount.During normal use, this electrical part has an operating temperature of -40°C~125°C.Using a 2.7V~5.5VV power source should be sufficient.An impedance-matching device is used to terminate transmission lines using a 36 termination.MAX6955 devices are among the devices in this family.There are a total of 21 36 pins on the device.36 pins are used in the design.As this electronic component is mounted on the board using the Surface Mount axis, we can adjust the position of the component.Display drivers is powered from a supply voltage of 3.3V.If 22mA is to function properly, it must be supplied with current.A 128 segment is defined as any member of the Seller Group's equipment solutions business which is called "Electronics".The same applies to Display Drivers.The supply voltage should be maintained at 5.5V for high efficiency.Powered by two 3/5V power supplies, it can be operated anywhere in the world.There is a maximum current supplied for its operation that reaches the value 30mA.There is an output configuration of 19 on it.
MAX6955AAX+ Features
36-BSOP (0.295, 7.50mm Width) package
MAX6955 family
36 pin count
36 pins
3/5V power supplies
19 output
MAX6955AAX+ Applications
There are a lot of Maxim Integrated MAX6955AAX+ display drivers applications.
- Metering
- Test Equipment
- Industrial Control Indicator
- Instrument Clusters
- White Goods
- Climate Controls
- White Goods Industrial Weighing
- Industrial Controllers and Instrumentation
- Driving low-voltag fluorescent displays
- Medical Equipment
