MAX6955ATL+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.0513W |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6955 |
| Pin Count | 40 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Configuration | 7, 14, 16 Segment |
| Interface | I2C |
| Operating Supply Current | 22mA |
| Power Dissipation | 2.0513W |
| Max Supply Current | 30mA |
| Display Type | LED |
| High Level Output Current | 55mA |
| Low Level Output Current | 935mA |
| fmax-Min | 8 MHz |
| Number of Segments | 128 |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Number of Digits/Characters | 16-DIGIT |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6955ATL+T Overview
Display drivers is packaged in the way of Tape & Reel (TR).A version 40-WFQFN Exposed Pad of the package includes it.I would like to point out that this electrical device has a LED display type.Display drivers is mounted on the board wDisplay driversh the help of Surface Mount.During normal use, this electrical part has an operating temperature of -40°C~125°C.Using a 2.7V~5.5VV power source should be sufficient.Transmission lines are terminated with 40 terminations using devices whose characteristic impedance matches that of the transmission line.The device belongs to the MAX6955 family.Display drivers is equipped wDisplay driversh 40 pin count.As a result, it has 40 pins.As this electronic component is mounted on the board using the Surface Mount axis, we can adjust the position of the component.There is a voltage of 3.3V applied to the supply voltage of this device.A supply current must be supplied to 22mA for it to function fully.128 segments refer to any member of the Seller Group's equipment solutions business that falls under the category of "Electronics.".The same can also be done with Display Drivers.In order to achieve high efficiency, it is recommended that the supply voltage be maintained at 5.5V.The power supply for the system is supplied by 3/5V.The maximum current supplied to it for operation reaches 30mA.
MAX6955ATL+T Features
40-WFQFN Exposed Pad package
MAX6955 family
40 pin count
40 pins
3/5V power supplies
MAX6955ATL+T Applications
There are a lot of Maxim Integrated MAX6955ATL+T display drivers applications.
- Set-Top Boxes
- Bar Graphs and Matrix Displays
- Bargraph Dlsplays
- Climate Controls
- Battery Operated Applications
- Automotive Telecom
- Battery Operated Products
- Industrial Controllers
- Digital Clock, Thermometer, Counter, Voltmeter
- Mobile projector
