MAX695MJE/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Screening Level | 38535Q/M;38534H;883B |
| Height Seated (Max) | 5.842mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX695MJE/883B Overview
As you can see, this power management is mounted through 16 terminals. A Tube package is used to package the power management. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 16-CDIP (0.300, 7.62mm) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 245. IC management conducts in a 5V-voltage supply. When 1 is applied to the power ic, it conducts. Through Hole mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. 16 pins are present in total in this power management. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.75V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThis power management is the recommended temperature range for the supervisors: -55°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. Supplied with a operating current of 10mA, this PMIC is capable of fully function as specified. To operate this power management, you will need at least 5V volts of power. The power management can work with a maximum supply temperature of 10mA.
MAX695MJE/883B Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX695MJE/883B Applications
There are a lot of Maxim Integrated MAX695MJE/883B Voltage Supervisors applications.
- Leakage current detection
- DC stabilized power supply module
- Military communications
- Microcontroller system
- Insulation fault location system
- Stable power system
- Automotive power systems
- Computer applications
- Telecommunications equipment
- Functional modules
