MAX6964AEG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 761mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 400kHz |
| Base Part Number | MAX6964 |
| Pin Count | 24 |
| Number of Outputs | 17 |
| Operating Supply Voltage | 3.6V |
| Power Dissipation | 761mW |
| Max Supply Current | 122.1μA |
| Voltage - Output | 7V |
| Internal Switch(s) | Yes |
| Low Level Output Current | 50mA |
| fmax-Min | 0.4 MHz |
| Number of Segments | 12 |
| Voltage - Supply (Min) | 2V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Supply Voltage1-Max | 7V |
| Height Seated (Max) | 1.73mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6964AEG+T Overview
To save board space, it uses the 24-SSOP (0.154, 3.90mm Width) package. A LED driver with 17 outputs is designed.The led light driver is mounted using Surface Mount.When it emerges as a Linear, it shows high-performance and reliability.The led light driver operates normally at -40°C~125°C TA. The benefits of Backlight are considerable.As a result, it operates in accordance with the frequency of 400kHz.The system operates with a termination of 0.This configuration is built upon 24 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 2V.The number of segments is estimated to be 12.As you can see, it is mounted by Surface Mount.LED drivers have a base part number of MAX6964.The output voltage of the device is 7V.24 pins are on the device.A minimal supply current is required in order for this device to provide high efficiency.It is necessary to use 3.6V voltage to power systems.
MAX6964AEG+T Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 400kHz
Supply voltage of 3.3V
Operating with the supply voltage of 3.6V
MAX6964AEG+T Applications
There are a lot of Maxim Integrated MAX6964AEG+T LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Sports Facility Lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED headlights
- Down lights
- Replacement lamps
- Amusement Machines
- Scanners and Handy Terminals
- Other Electronic Devices
