MAX6964ATG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.666W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Base Part Number | MAX6964 |
| Pin Count | 24 |
| Number of Outputs | 17 |
| Operating Supply Voltage | 3.6V |
| Power Dissipation | 1.666W |
| Output Current | 50mA |
| Max Supply Current | 122.1μA |
| Voltage - Output | 7V |
| Min Input Voltage | 2V |
| Max Input Voltage | 3.6V |
| Internal Switch(s) | Yes |
| Low Level Output Current | 50mA |
| fmax-Min | 0.4 MHz |
| Number of Segments | 12 |
| Multiplexed Display Capability | NO |
| Supply Voltage1-Max | 7V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6964ATG+ Overview
Using its 24-WFQFN Exposed Pad package, it is possible to save board space. As part of the design of this LED driver, there are 17 outputs that have been used.The led light driver is mounted using Surface Mount.With high efficiency, it appears as a Linear.The led light driver operates normally at -40°C~125°C TA. Backlight has considerable advantages.Frequency 400kHz is the basis of operation.It operates using 24 terminations.It is configured with 24 pins as its base.Based on our estimates, there are 12 segments.I have mounted it by Surface Mount.LED drivers are found under the base part number MAX6964.Its output voltage is 7V.The device has 24 pins.It operates with the minimal input voltage of 2V.The maximum supply current is 3.6V.As long as the maximum supply current is under 122.1μA, it can deliver high efficiency.It is possible to supply the load with 50mA current.The power of systems depends on having 3.6V voltages inside.
MAX6964ATG+ Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 400kHz
Supply voltage of 3.3V
Operating with the supply voltage of 3.6V
MAX6964ATG+ Applications
There are a lot of Maxim Integrated MAX6964ATG+ LED Driver ICs applications.
- Stage and Studio lighting
- LED headlights
- Portable lighting
- LED Lightings for Inspection Devices
- Amusement Machines
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- LED Lighting PFCs, Linear Dimmable
- Down lights
- A- lamps
