MAX6966AEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 667mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 45kHz |
| Base Part Number | MAX6966 |
| Pin Count | 16 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.6V |
| Power Supplies | 2.5/3.3V |
| Power Dissipation | 667mW |
| Max Supply Current | 730μA |
| Voltage - Output | 7V |
| Min Input Voltage | 2.25V |
| Max Input Voltage | 3.6V |
| Current - Output / Channel | 20mA |
| Internal Switch(s) | Yes |
| Low Level Output Current | 21.1mA |
| fmax-Min | 0.1 MHz |
| Number of Segments | 10 |
| Switching Frequency | 45kHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.5mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6966AEE+ Overview
There is a 16-SSOP (0.154, 3.90mm Width) package on the board that is used to save space. For the design of this LED driver, 10 outputs are used.Surface Mount is used for mounting the led light driver.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.At -40°C~125°C TA, the led driver is capable of operating.The benefits are considerable for Backlight.A frequency of 45kHz is used as the basis for operation.The terminations 16 are designed for its operation.With 16 pins at the base, this LED driver has a base configuration.10 segments exist.The mount is in the way of Surface Mount.A base part number of MAX6966 is associated with this LED driver.The voltage output by it is 7V.16 pins are included in it.In addition, a Display Drivers is assigned based on the characteristics of the object.A minimal input voltage of 2.25V is required for it to operate.In the case of supply current, there is a maximum value of 3.6V.When the supply current should be less than 730μA, the device will provide high efficiency.It is necessary to use 3.6V voltage to power systems.When the switching frequency is maintained at 45kHz, this electronic component is able to fully play its functions.
MAX6966AEE+ Features
Available in the 16-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 45kHz
Supply voltage of 3.3V
Operating with the supply voltage of 3.6V
Switching frequency of 45kHz
MAX6966AEE+ Applications
There are a lot of Maxim Integrated MAX6966AEE+ LED Driver ICs applications.
- Panel lighting
- Medical surgery lighting
- General lighting
- OLED power supply for portable equipment
- Stage and Studio lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Museum lighting
- Other Electronic Devices
- Gallery lighting
- LED Lighting PFCs, Linear Dimmable
