MAX6968AUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Lighting, Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.702W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6968 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Power Dissipation | 1.702W |
| Output Current | 55mA |
| Max Supply Current | 25mA |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| Low Level Output Current | 60mA |
| Number of Segments | 8 |
| Switching Frequency | 5MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6968AUE+ Overview
To save board space, it uses the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package. Using this LED driver, there are 8 outputs.As far as mounting is concerned, Surface Mount is adopted.With high reliability and efficiency, this emerges as a Linear.At -40°C~125°C TA, the led driver is capable of operating.It is clear that Lighting, Signage will benefit from the program.For its operation, 16 terminations are designed.The base of this board is configured as 16 pins.A total of 8 segments have been created.Surface Mount has been mounted with the device.Under the base part number MAX6968, you will find this LED driver.The device has a pin count of 16.Additionally, it is categorized into Display Drivers according to its characteristics.A minimal input voltage of 3V is required for it to operate.It is possible to supply current up to 5.5V.It is capable of delivering high efficiency when the maximal supply current is below 25mA.In this case, the load can only be supplied with 55mA current.The power of systems depends on having 5.5V voltages inside.It's possible for this electronic component to fully function when the switching frequency is maintained at 5MHz.
MAX6968AUE+ Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Operating with the supply voltage of 5.5V
Switching frequency of 5MHz
MAX6968AUE+ Applications
There are a lot of Maxim Integrated MAX6968AUE+ LED Driver ICs applications.
- OLED power supply for portable equipment
- Down lighting
- Museum lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Other Electronic Devices
- Panel lighting
- Replacement lamps
- Architectural lighting
- Stage and Studio lighting
