MAX6969ANG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.067W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX6969 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Power Dissipation | 1.067W |
| Output Current | 55mA |
| Max Supply Current | 25mA |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| Low Level Output Current | 60mA |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 4.45mm |
| Length | 32.13mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6969ANG+ Overview
24-DIP (0.300, 7.62mm) saves board space. Using this LED driver, there are 16 outputs.The mounting method adopted is Through Hole.As a Linear, it has high efficiency and reliability.If the led driver ic is set to -40°C~125°C TA, it will work normally.The benefits it provides to Signage are considerable.It operates with 24 terminations.This configuration is built upon 24 pins.A total of 32 segments are estimated.The mount is in the way of Through Hole.The LED driver is available under the part number MAX6969.A total of 24 pins are present on this device.Additionally, it is categorized into Display Drivers according to its characteristics.The minimum input voltage for this device is 3V.There is 5.5V maximum value for supply current.Its high efficiency is based on the fact that the maximal supply current should not exceed 25mA.In this case, the load can only be supplied with 55mA current.It is necessary to power systems with a voltage of 5.5V
MAX6969ANG+ Features
Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Operating with the supply voltage of 5.5V
MAX6969ANG+ Applications
There are a lot of Maxim Integrated MAX6969ANG+ LED Driver ICs applications.
- Stage Lighting and Signage
- Linear fluorescent
- LED Lightings for Inspection Devices
- Industrial LED Lighting: Image Recognition Devices
- Auxiliary lights for on-vehicle cameras
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Portable lighting
- Dimmable LED for vehicle interiors
- Museum lighting
- Gallery lighting
