MAX696CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX696 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 300μA |
| Max Supply Current | 300μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 35ms Minimum |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX696CPE+ Overview
As you can see, this power management is mounted through 16 terminals. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. There are 16-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Through Hole mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 16. Pin count of the power management is 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. During operation, this power management system outputs Push-Pull, Push-Pull. Supplied with a operating current of 300μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX696, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3.3/5V volts of power. A maximum supply temperature of 300μA can be used with this power management.
MAX696CPE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current
MAX696CPE+ Applications
There are a lot of Maxim Integrated MAX696CPE+ Voltage Supervisors applications.
- DSP
- Power distribution systems of CCU
- Detection of phase imbalance
- Transformer load monitoring equipment
- Sensitive sensors
- Electric heating appliances
- Computer applications
- Smart meter
- Linux and server computing
- Satellite navigation
