MAX696CWE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Frequency | 250kHz |
| Base Part Number | MAX696 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 300μA |
| Power Dissipation | 600mW |
| Max Supply Current | 300μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 35ms Minimum |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX696CWE Overview
This power management consists of 16 mounting terminals on which it can be mounted. A Tube package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. There are 16-SOIC (0.295, 7.50mm Width) functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 245 for the package during reflow. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 16 pins on IC management. 16 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. There is a supply current of 300μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX696. A power supply of 3.3/5V watts is required for the operation of this power management. A maximum supply temperature of 300μA can be used with this power management. As a rule of thumb, voltage supervisor will work well in most cases with a frequency of 250kHz.
MAX696CWE Features
Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current
MAX696CWE Applications
There are a lot of Maxim Integrated MAX696CWE Voltage Supervisors applications.
- Efficient information transmission
- Important electronics for automotive protection
- Linux and server computing
- Medical-specific isolation transformer
- Display equipment
- Leakage protection
- Electric heating appliances
- Consumer electronics
- Detection of phase sequence
- WiFi router
