MAX6978APE+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | MATTE TIN |
| Applications | Signage |
| Max Power Dissipation | 842mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX6978 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5.5V |
| Max Supply Voltage | 5.5V |
| Power Dissipation | 842mW |
| Max Supply Current | 25mA |
| Topology | Shift Register |
| Output Current per Channel | 55mA |
| Internal Switch(s) | Yes |
| Low Level Output Current | 60mA |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 4.572mm |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX6978APE+ Overview
The 16-DIP (0.300, 7.62mm) package saves space on the board. In LED drivers, the outputs are all set to 8.Through Hole is used to mount the led driver.This emerges as a Linear with high efficiency and reliability.The LED driver is capable of operating at a temperature of -40°C~125°C TA.There are considerable benefits for Signage.The operation of this system is supported by 16 terminations.It is configured with 16 pins as its base.Having a voltage supply below 3V can lead to undetermined failures.There are estimated to be 8 segments.Through Hole has been mounted with the device.The base part number for this LED driver is MAX6978.It is acceptable for the supply voltage to be 5.5V.In this device, there are 16 pins.As long as the maximum supply current is less than 25mA, this device is capable of providing high efficiency.The internal voltages needed to power systems is 5.5V.
MAX6978APE+ Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Operating with the supply voltage of 5.5V
MAX6978APE+ Applications
There are a lot of Maxim Integrated MAX6978APE+ LED Driver ICs applications.
- Linear fluorescent
- A- lamps
- Down lighting
- LED Lightings for Inspection Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Architectural lighting
- General lighting
- Sports Facility Lighting
