Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-CDIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
600mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Output |
Push-Pull, Push-Pull |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Power Supplies |
3.3/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
3V |
Operating Supply Current |
300μA |
Max Supply Current |
300μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active High/Active Low |
Voltage - Threshold |
Adjustable/Selectable |
Number of Voltages Monitored |
2 |
Reset Timeout |
35ms Minimum |
Height Seated (Max) |
5.08mm |
RoHS Status |
Non-RoHS Compliant |
MAX697MJE/883B Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 16-CDIP (0.300, 7.62mm) package. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 245. When a supply voltage of 2 is applied to the power ic, it conducts. Power management is included in the Through Hole mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 16 pins on IC management. Power managment ic pin count is 16. There should be a minimum voltage supply (Vsup) of 3V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -55°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. Supplied with a operating current of 300μA, this PMIC is capable of fully function as specified. To operate this power management, you will need at least 3.3/5V volts of power. At most, voltage supervisor can operate at a supply temperature of 300μA.
MAX697MJE/883B Features
Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current
MAX697MJE/883B Applications
There are a lot of Maxim Integrated MAX697MJE/883B Voltage Supervisors applications.
- Utility meter
- Leakage protection
- Urban rail transit weak current power monitoring
- Network equipment
- Display equipment
- Microcontroller system
- Important electronics for automotive protection
- Detection of phase sequence
- Power distribution systems of ICU
- Electrical fire monitoring system