Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Additional Feature |
WATCHDOG TIMER |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
600mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX699 |
Output |
Open Drain, Push-Pull |
Pin Count |
16 |
Power Supplies |
3.3/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
3V |
Operating Supply Current |
5mA |
Max Supply Current |
5mA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.65V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Threshold Voltage |
+4.65V |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX699CWE Overview
A total of 16 terminals are used to mount this power management. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes 16-SOIC (0.295, 7.50mm Width) functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 245. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, it has 16 pins on IC management. This power management has 16 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . During normal operation, this power managment ic can generate Open Drain, Push-Pull of output voltage. Supplied with a operating current of 5mA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by MAX699. To be able to work, this power management requires 3.3/5V volts of power. At the most, voltage supervisor can work with a supply temperature of 5mA.
MAX699CWE Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
5mA operating supply current
MAX699CWE Applications
There are a lot of Maxim Integrated MAX699CWE Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Power distribution systems of operating room
- DVR
- Utility meter
- Battery-powered equipment
- Magnetic resonance imaging
- WiFi router
- Detection of phase imbalance
- Electrical fire monitoring system
- Sensitive sensors