MAX699EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX699 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 5mA |
| Max Supply Current | 5mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +4.65V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX699EPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tube-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Through Hole. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. Pin count of the power management is 8. It is recommended that Vsup should not be less than 3V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Through Hole mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 5mA. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX699, which is the base power ics number. To operate this power management, you will need at least 3.3/5V volts of power. The maximum supply temperature is 5mA.
MAX699EPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
5mA operating supply current
MAX699EPA+ Applications
There are a lot of Maxim Integrated MAX699EPA+ Voltage Supervisors applications.
- Household appliances
- Medical-specific isolation transformer
- Detection of phase imbalance
- Unattended substation automation
- WiFi router
- Consumer electronics
- Power distribution systems of ICU
- Efficient information transmission
- Detection of phase loss
- Embedded computing
