MAX701ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 380mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX701 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.65V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX701ESA+ Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 3V for this PMIC. The supply voltage (Vsup) should not exceed 15V volts in this IC power. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Push-Pull. As far as the supply current of the power management is concerned, it is 200μA. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. It is always advisable to use MAX701, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 200μA.
MAX701ESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
200μA operating supply current
MAX701ESA+ Applications
There are a lot of Maxim Integrated MAX701ESA+ Voltage Supervisors applications.
- Network equipment
- Power distribution systems of infant care room
- Automotive permanent magnet synchronous motors
- Set top box
- Low voltage/high power - AI, GPU
- Power communication system
- Embedded computing
- Battery-powered equipment
- Cloud computing
- Telecommunications equipment
