MAX702CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 380mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX702 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 100μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.65V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX702CSA+ Overview
It is mounted through 8 terminals on the power management. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 8 pins are located on this power management. Power managment ic pin count is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3V. The supply voltage (Vsup) should not exceed 15V volts in this IC power. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 200μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX702, which is the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. The maximum supply temperature voltage supervisor can handle is 200μA.
MAX702CSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
200μA operating supply current
MAX702CSA+ Applications
There are a lot of Maxim Integrated MAX702CSA+ Voltage Supervisors applications.
- Smart meter
- External alarm
- WiFi router
- Sensitive sensors
- DC stabilized power supply module
- Power distribution systems of operating room
- Leakage current detection
- Precision measurement
- Satellite navigation
- Analog circuit
