MAX702EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 380mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX702 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.752mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX702EPA+ Overview
A total of 8 terminals are used to mount this power management. Tube-packaging is used. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Through Hole-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. Pin count of the power management is 8. IC management can only work with a supply voltage of 3V volts. The maximum supply voltage (Vsup) is not to exceed 15V volts in this IC management. Mounting type Through Hole is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 200μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by MAX702. In order to operate this power management, it requires 5V volts of power. Voltage supervisor can work with a supply temperature of 200μA at the most.
MAX702EPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
200μA operating supply current
MAX702EPA+ Applications
There are a lot of Maxim Integrated MAX702EPA+ Voltage Supervisors applications.
- WiFi router
- Automotive power systems
- Power distribution systems of ICU
- Magnetic resonance imaging
- Refrigeration
- Microcontroller system
- Personal computers
- DC stabilized power supply module
- Analog circuit
- Important electronics for automotive safety
