MAX704CPA+
| Parameters | |
|---|---|
| Operating Supply Current | 350μA |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX704 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
MAX704CPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Through Hole mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 8. The pins of the power management system count 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Through Hole type of mounting. You should set the supervisor's temperature during 0°C~70°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 350μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MAX704. The power management must be powered by 5V volts to function properly. Voltage supervisor can work with a supply temperature of 350μA at the most.
MAX704CPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX704CPA+ Applications
There are a lot of Maxim Integrated MAX704CPA+ Voltage Supervisors applications.
- Battery-powered equipment
- Electrical fire monitoring system
- Precision measurement
- Dash board
- Digitally controlled LDO regulators circuit
- Leakage current detection
- DC stabilized power supply module
- Urban rail transit weak current power monitoring
- FPGA design
- Electric heating appliances
