MAX704EPA+
| Parameters | |
|---|---|
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX704 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 500μA |
| Max Supply Current | 500μA |
MAX704EPA+ Overview
There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Using Through Hole, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. 8 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 500μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX704, which is the base power ics number. It requires 5V watts of power to operate this voltage supervisor. A maximum supply temperature of 500μA can be used.
MAX704EPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
500μA operating supply current
MAX704EPA+ Applications
There are a lot of Maxim Integrated MAX704EPA+ Voltage Supervisors applications.
- Power distribution systems of CCU
- DC stabilized power supply module
- Medical-specific isolation transformer
- Kitchen appliances
- Insulation fault location system
- Rechargeable batteries
- WiFi router
- DVR
- Solar power charger
- Data storage applications
