MAX704SCPA+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3.02V |
| Threshold Voltage | 2.925V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3.02V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX704SCPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached DIP functions for your reference in this IC power. This IC power shares lots of benefits with other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Through Hole mount. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The supervisor's supply current is specified to 50μA. It requires 3/5V watts of power to operate this voltage supervisor.
MAX704SCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX704SCPA+ Applications
There are a lot of Maxim Integrated MAX704SCPA+ Voltage Supervisors applications.
- Network equipment
- Military electronics
- DSP
- Data storage applications
- Insulation fault location system
- Linux and server computing
- Efficient information transmission
- Radar
- Low voltage/high power - AI, GPU
- Smartphones
