MAX704SEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3.02V |
| Threshold Voltage | 2.925V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3.02V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX704SEPA+ Overview
It is mounted through 8 terminals on the power management. Packaging is in the form of a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of DIP functions. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. There is a specification for the peak reflow temperature of the package to be 260. Power management conducts at a voltage of 1. Power management is included in the Through Hole mount. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. 8 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The power management's supply current is 50μA. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate.
MAX704SEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
50μA operating supply current
MAX704SEPA+ Applications
There are a lot of Maxim Integrated MAX704SEPA+ Voltage Supervisors applications.
- Important electronics for automotive protection
- External alarm
- Military electronics
- Insulation fault location system
- Sensitive sensors
- emergency room
- Solar power charger
- Automotive power systems
- Battery-powered equipment
- Cloud computing
