MAX704TCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.17V |
| Threshold Voltage | 3.075V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.17V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX704TCPA+ Overview
Power management is mounted through 8 terminals. Packaging is in the form of a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a PDIP package. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1 is used to conduct the PMIC chip. By Through Hole, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. 8 pins are present in total in this power management. There are 8 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. As far as the supply current of the power management is concerned, it is 50μA. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate.
MAX704TCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX704TCPA+ Applications
There are a lot of Maxim Integrated MAX704TCPA+ Voltage Supervisors applications.
- Computer applications
- Rechargeable batteries
- Solar power charger
- Utility meter
- External alarm
- Power distribution systems of operating room
- FPGA design
- Dash board
- Cloud computing
- Personal computers
