Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Battery Backup Circuit |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
471mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Base Part Number |
MAX704 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Power Supplies |
3/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
350μA |
Nominal Supply Current |
50μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.075V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Supply Current-Max (Isup) |
0.05mA |
Min Reset Threshold Voltage |
3V |
Max Reset Threshold Voltage |
3.17V |
Undervoltage Threshold |
3V |
Overvoltage Threshold |
3.17V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX704TCSA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. A total of 8 pins are located on this power management. 8 pins make up the power management. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 350μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX704, the base power ics number. In order to operate this power management, it requires 3/5V volts of power.
MAX704TCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
350μA operating supply current
MAX704TCSA+ Applications
There are a lot of Maxim Integrated MAX704TCSA+ Voltage Supervisors applications.
- Leakage current detection
- Rechargeable batteries
- Automotive power systems
- Power communication system
- Personal computers
- Refrigeration
- Computer applications
- Transformer load monitoring equipment
- Sensitive sensors
- Analog circuit