MAX704TEPA+
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.17V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.17V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX704 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
MAX704TEPA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is packaged in a Tube way. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. Power ics operate at 1 supply voltages. The mount is provided by Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 8 pins are located on this power management. The pins of the power management system count 8. IC management can only work with a supply voltage of 1.1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 50μA. You can always use MAX704, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 3/5V volts of power.
MAX704TEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
50μA operating supply current
MAX704TEPA+ Applications
There are a lot of Maxim Integrated MAX704TEPA+ Voltage Supervisors applications.
- Multi-voltage system
- Transformer load monitoring equipment
- Household appliances
- Smartphones
- Linux and server computing
- Cloud computing
- Display equipment
- DSP
- Power distribution systems of CCU
- Medical-specific isolation transformer
