MAX705MJA/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 500μA |
| Max Supply Current | 500μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX705MJA/883B Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. Please refer to power management for 8-CDIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 245 is specified for the package. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 8 pins on IC management. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Through Hole is recommended. You should set the supervisor's temperature during -55°C~125°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 500μA for the power management. A power supply of 5V watts is required for the operation of this power management. The power management can work with a maximum supply temperature of 500μA.
MAX705MJA/883B Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500μA operating supply current
MAX705MJA/883B Applications
There are a lot of Maxim Integrated MAX705MJA/883B Voltage Supervisors applications.
- Battery-powered equipment
- Urban rail transit weak current power monitoring
- Smartphones
- Multi-voltage system
- Battery cars
- Data storage applications
- Important electronics for automotive safety
- Household appliances
- Leakage current detection
- Important electronics for automotive protection
