MAX706ATEPA+
| Parameters | |
|---|---|
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3.08V |
| Reset Delay Time | 200 ms |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727.3mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3.15V |
| Operating Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
MAX706ATEPA+ Overview
Power management is mounted through 8 terminals. Power management is packaged in a Tube way. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. When 3V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The mount is provided by Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. This power management has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3.15V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 100μA volt supply current. There are other features such as WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR to name a few. To find similar IC managements from the manufacturer, you can always search by MAX706. To be able to work, this power management requires 3.3/5V volts of power.
MAX706ATEPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.15V
100μA operating supply current
MAX706ATEPA+ Applications
There are a lot of Maxim Integrated MAX706ATEPA+ Voltage Supervisors applications.
- Functional modules
- Battery cars
- Microprocessor system
- Sensitive sensors
- Insulation fault location system
- Telecommunications equipment
- Smart meter
- Satellite navigation
- Multi-voltage system
- Linux and server computing
