banner_page

MAX706ATESA+

3V8 Terminals 8-Pin MAX706 Voltage supervisor1 Channels Min 1.2V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX706ATESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 897
  • Description: 3V8 Terminals 8-Pin MAX706 Voltage supervisor1 Channels Min 1.2V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Additional Feature WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR
Subcategory Power Management Circuits
Max Power Dissipation 470.6mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Base Part Number MAX706
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 3.3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.2V
Operating Supply Current 90μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 3.08V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Supply Current-Max (Isup) 0.5mA
Min Reset Threshold Voltage 3V
Max Reset Threshold Voltage 3.15V
Undervoltage Threshold 3V
Overvoltage Threshold 3.15V
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX706ATESA+ Overview


There are 8 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tube. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins make up the power management. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 90μA. There are other features such as WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR to name a few. You can always use MAX706, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 3.3/5V watts is required for the operation of this power management.

MAX706ATESA+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
90μA operating supply current

MAX706ATESA+ Applications


There are a lot of Maxim Integrated MAX706ATESA+ Voltage Supervisors applications.

  • Precision measurement
  • Power distribution systems of ICU
  • Satellite navigation
  • Embedded computing
  • Medical-specific isolation transformer
  • Leakage current detection
  • Power distribution systems of infant care room
  • FPGA design
  • Multi-voltage system
  • Rechargeable batteries

Write a review

Note: HTML is not translated!
    Bad           Good